DigitaLinx

Simply put, DigitaLinx exists for one reason, to make your life easier.

DigitaLinx - Easy, Solid, Affordable Digital Solutions

We get it, time is money, Why not finish an install in record time, and save money while doing it? Featuring HDMI extenders that can be powered from either end, slim enough to get mounted behind a flat panel, and boasting features like ethernet passthrough, DigitaLinx products don't sacrifice technology for price.

Learn about our newest DigitaLinx products.

The IPEX2001/2002 transmits HDMI video and audio over a gigabit IP network using h.264 AVC encoding with a data rate up to 30 Mbps. The IPEX2001 supports video signals up to 1920x1200 at 60 Hz. The IPEX2001 outputs two video streams: one large IP stream at the native content resolution and a smaller video stream at 352x288 at 5 Hz to easily view a preview of the content on PC software or an iPad. An analog audio output port de-embeds the audio from the HDMI content, while still streaming the audio with the video content.  Read more...

The DL-S41-H2 is a slimline HDMI 2.0b auto switcher with four HDMI video inputs and one HDMI output. This switcher supports HDMI video resolutions up to 4Kx2K@60Hz 4:4:4, HDR, and multichannel audio. In addition to passing EDID information from the display, there are multiple built-in EDID settings to simplify an installation. The switcher will de-embed digital stereo audio to provide an analog audio source for an existing audio system. The switcher also supports audio return channel (ARC) for transmitting audio back to HDMI input and audio output ports from display device. Read more...

The DigitaLinx DL-SE3H1V-C is a 4K compatible, 4 input multi format A/V auto switcher, extender and video scaler system that supports long distance transport of HDMI between transmitter and receiver up to 70 meters / 230’ using Cat6 cabling. System supports PoE , receiver powers transmitter.  Read more...

The DigitaLinx DL-UHDILC is an HDMI in-line controller that can automate room peripherals and sink devices when a video signal is introduced to the unit. The DL-UHDILC is 4K compatible, supports HDCP version 2.2, has an analog and digital de-embedded audio output and has 15 built in EDID presets that can be adjusted by the rotary dial on the front panel. Read more...

The DigitaLinx DL-UHDRC70 is an re-clocking HDBT extender system that is compatible with source devices that does not support clock stretching such as older cable set top boxes. The DL-UHDRC70 can extend HDMI up to 70m / 230' and also extends bi-directional IR as well as RS232. Supports 7.1 DTS Master HD and Dolby True HD.

The DigitaLinx DL-HD2-RX is an HDBT 2.0 receiver that is compatible with the DL-1H1V1U-WP-W 2x1 auto switching wall plate that transmits HDMI, VGA and USB 2.0 up to 100 meters / 330'. There is an RS232 port for connecting displays for on/off automation, HDMI out and de-embed 3.5mm audio output as well as a 4 port USB hub that features four USB (A) ports. When paired with the DL-1H1V1U-WP-W, the extenders system is ideal for situations where USB must be extended with HDMI or VGA for interactivity for items such as whiteboards for conference rooms or classrooms.

The DigitaLinx DL-HD2100 HDBaseT extender set extends HDMI audio, video as well as control up to 100m / 330’ using a single Category 6 cable (4k@70M / 1080P@100m). Supports HDMI 2.0a, HDR10 and HDCP 2.2 as well as Dolby Atmos and DTS:X audio formats. Control extension supports bidirectional IR, Ethernet, ARC and RS232. Built in re-clocking circuitry ensures that extender set is backwards compatible with older HDMI version chip sets.  Read more...

The DigitaLinx DL-A31 is a three input by one output slim HDMI matrix with Ultra HD 4K support. The DL-A31 is HDMI 2.0, HDCP 2.2, and DVI 1.0 compliant. The matrix switcher supports resolutions up to 4k/60Hz, 4:2:0, 8 bit deep color. Read more...

The DigitaLinx DL-A51 is a five input by one output slim HDMI matrix with Ultra HD 4K support. The DL-A51 is HDMI 2.0, HDCP 2.2, and DVI 1.0 compliant. The matrix switcher supports resolutions up to 4k/60Hz, 4:2:0, 8 bit deep color. Read more...

The DigitaLinx DL-HD50C is an HDMI Extender over Single Cat6 with IR up to a distance of 164ft/50m. The DL-HD50C features EDID management, which allows and encourages source and display “handshake” for seamless integration. Deep color video, 1080p High Definition resolution, DTS-HD or Dolby TrueHD audio are supported with this extender.  Read more...

The DL-44E-KIT is a professional 4K HDBaseT home distribution hub kit, which consists of a 4K HDBaseT matrix switcher, 3 HDBaseT receivers and accessories. The DL-44E-KIT is a professional 4x4 HDBaseT matrix switcher that consist of the following inputs and outputs: 4 HDMI IN (4kx2K@60Hz signal at max), 3 IR IN, 1 IR EYE, 4 IR OUT, 3 HDBaseT OUT, 1 HDMI OUT, 1 SPDIF OUT, 1 L&R RCA OUT, and TCP/IP, RS232 control port via phoenix connector. The DL-44E-KIT offers manual HDCP management and auto-detecting along with easy installation with rack-mounting design. Read more...

The DigitaLinx DL-VHD is a VGA to HDMI converter that converts computer video and stereo audio to HDMI. The DL-VHD VGA input supports resolution up to 1920x1200@60Hz along with HDMI output support of HDMI 1.4. The DL-VHD features fixed EDID mode and superior ESD protection. The DL-VHD is a Plug and Play device which allows for a hassle free install.

The IPEX2001/2002 transmits HDMI video and audio over a gigabit IP network using h.264 AVC encoding with a data rate up to 30 Mbps. The IPEX2001 supports video signals up to 1920x1200 at 60 Hz. The IPEX2001 outputs two video streams: one large IP stream at the native content resolution and a smaller video stream at 352x288 at 5 Hz to easily view a preview of the content on PC software or an iPad. An analog audio output port de-embeds the audio from the HDMI content, while still streaming the audio with the video content.  Read more...

The Digitalinx IP IPEX5001 transmits HDMI video and audio over a 1 gigabit network infrastructure using JPEG2000 encoding with a variable data rate at an average of 250 Mbps with peak values up to 850Mbps. The IPEX5001 supports video signals up to 4K at 60 Hz 4:2:0 / 8 bit color with HDR10, HDCP 2.2 and multichannel audio support. An analog audio input port embeds analog audio with the video content, such as a DVI video source. An analog audio output port de-embeds stereo 2 channel audio from the HDMI content, while still passing stereo 2 channel audio to the HDMI output.  Read more...

The Digitalinx IP IPEX5002 receives HDMI video and audio over a 1 gigabit network infrastructure using JPEG2000 encoding from the IPEX5001 and IPEX5001-WP-W encoder. The IPEX5002 outputs video signals natively from source or can be scaled to 1080p or 4K at 24/30Hz 4:4:4 with HDR10, HDCP 2.2 and multichannel audio support. An analog audio output port de-embeds stereo 2 channel audio from the HDMI content while still passing stereo 2 channel audio to the HDMI output. Depending on the needs of the installation, multiple IPEX5002 devices can be configured to make a video wall up to a 16x16 configuration.  Read more...

The DigitalinxIP IPEXCB is an IP control box that is used as an A/V control device for controlling, configuring and managing encoders and decoders on the local area network. It integrates two Ethernet ports and two RS232 ports, offering integration-friendly control features, including a web GUI . It also can be used with a third party controller to provide a simple, flexible control and management options.  Read more...

The DigitaLinx DL-HDM88-FS is an eight input by eight output seamless 4K scaling HDMI matrix switcher with input support up to 4k@30Hz and HDCP2.2. With a high-performance 4K@30Hz video scaler built into each output channel, it easily scales various resolutions to match the best video and picture quality across all displays. The DL-HDM88-FS provides each HDMI output with a de-embedded 3-pin unbalanced stereo audio out to feed an audio amplifier system. Read more...

The DL-USB3.0 is a USB 3.0 active copper cable that offers extension up to 15 meters. The DL-USB3.0 is bus powered from the host PC side and USB 3.0 power connector is available if additional power is required. The DL-USB3.0 supports USB 3.0 throughputs up to 5Gbps, locking USB connector, rugged grade cabling and slot port for convenient cable tie mounting. The DL-USB3.0 supports only USB 3.0 devices. USB 2.0 and 1.1 devices will not function using this extender.

The DigitaLinx BYOD-HUB-UT is a 6x1 multi format A/V auto switcher that features
a variety of input connection leads that are compatible with devices such as mobile
phones and tablets, allowing a dependable wired connection to a display or TV
monitor for presentation purposes. Read more...

The DL‐HFC Hybrid Active Optical HDMI® Cable is a Plenum Rated High Speed HDMI® product featuring a very low profile hybrid copper/fiber bulk cable, detachable HDMI heads for ease of pulling in very small and tight locations, and unbeatable performance. The product is capable ofsupporting digital multimedia data rates up to 10.2 Gbps. This permits this product to support full HDMI 2.0 resolutions of 4K@30Hz 4:4:4 and 4K@60Hz 4:2:0. The fiber optic technology utilized in this product is fully HDCP 2.2 compliant.  Read more...

The DigitaLinx DL-HDE100 extender set transmits HDMI (1080p, 4Kx2K (UHD) & 3D) including HDCP 2.2, Ethernet, bidirectional IR, and RS232 up to 100 meters away using a single twisted pair cable.

Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required. The 12 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.

The DL-HDE100 is sold only as a set. All accessories are included including two IR emitters, two IR receivers, and two pairs of mounting brackets with screws. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.

The Intelix IR-AC cable provides system integrators with 2-way IR integration between Digitalinx / Intelix products and 3rd party control systems. Compatible with Control4, Crestron, Savant, AMX and RTI control products.  Read more...

The Digitalinx DL-USB2 products will extend a Hi-Speed USB 2.0 signal (480 Mbps) up to 100 meters (328 feet). The modular extenders may be powered on either end for low power devices such as keyboards or mice. For remote devices which require more power, the client side extender will require to be powered. Read more...

The Digitalinx DL-USB2 products will extend a Hi-Speed USB 2.0 signal (480 Mbps) up to 100 meters (328 feet). The modular extenders may be powered on either end for low power devices such as keyboards or mice. For remote devices which require more power, the client side extender will require to be powered. Read more...

The Digitalinx DL-USB2 products will extend a Hi-Speed USB 2.0 signal (480 Mbps) up to 100 meters (328 feet). The extenders may be powered on either end for low power devices such as keyboards or mice. For remote devices which require more power, the client side extender will require to be powered. Read more...

The Digitalinx DL-USB2 products will extend a Hi-Speed USB 2.0 signal (480 Mbps) up to 100 meters (328 feet). The extenders may be powered on either end for low power devices such as keyboards or mice. For remote devices which require more power, the client side extender will require to be powered. Read more...

The DigitaLinx DL-DAC2 is a PCM two channel to stereo audio converter. The DL-DAC2 features optical and digital coaxial input audio connections. Analog output is simultaneously available on the 3.5mm jack and the stereo RCA jacks.

The DigitaLinx DL-DAC6 is a surround sound to stereo audio converter. The DL-DAC6 features optical and digital coaxial input audio connections. Analog output is simultaneously available on the 3.5mm jack and the stereo RCA jacks. The DL-DAC6 features a switch to specify which audio input is being used.

The DigitaLinx DL-HD70 extender set transmits HDMI (1080p, 4Kx2K (UHD) & 3D) including HDCP 2.2, bidirectional IR, and RS232 up to 70 meters away using a single twisted pair cable. Read more...

Don't be a loser - Eliminate your customer's panic & expense when presentation adapters go missing or get lost! Our patent-pending tensile aircraft strength ring & clamp locks on the HDMI cable going to your display keeping any adapter you may need is at your fingertips. Read more...

Don't be a loser - Eliminate your customer's panic & expense when presentation adapters go missing or get lost! Our patent-pending tensile aircraft strength ring & clamp locks on the HDMI cable going to your display keeping any adapter you may need is at your fingertips. Read more...